{"title":"Narex","description":null,"products":[{"product_id":"narex-854203-3-piece-set-course-cut-round-rattail-half-round-and-rectangular-250-mm-cabinetmaker-wood-rasp","title":"Narex 854203 3 Piece Set Course Cut Round Rattail, Half Round and Rectangular 250 mm Cabinetmaker Wood Rasp","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis is a set of 3 course rasps made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 3 course cut rasps: 10 mm round, 25 mm wide rectangular and 25 mm wide halfround. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. These are considered course cut rasps with 12 teeth per square centimeter. Handles are 145 mm long and 36 mm in diameter and have solid brass ferrules. Handles are made from hard and dense European Hornbeam. Rectangular and half round blades are 25 mm (1 inch) wide and 250 mm (10 inches) long. Overall lengths are 395 mm (16 inches). This is a well-made rasp set for a very reasonable price.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777619091784,"sku":"B0775GFJRT","price":243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-f6bedfc7a990.jpg?v=1786700091"},{"product_id":"narex-3-4-inch-unhandled-premium-chisel-blank-3-4-inch","title":"Narex 3\/4 Inch Unhandled Premium Chisel Blank (3\/4 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777621483848,"sku":"B07T7YGP9X","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-ef533dd5d0c6.jpg?v=1786700095"},{"product_id":"narex-876401-curved-tooth-mill-file-joinery-plane-maker-float-blade-10-inches-long-overall-length-15-3-4-inches","title":"Narex 876401 Curved Tooth Mill File Joinery\/Plane Maker Float, Blade 10 Inches Long, Overall Length 15-3\/4 Inches","description":"\u003cdiv class=\"text\"\u003e\n            This curved tooth mill file is designed for shaping wood, easing edges and refining joinery. The teeth are milled with a slight arc or curve which allows them to cut aggressively but still leave a surprisingly fine finish. The teeth cut by shearing wood instead of abrading it which produce small shavings and no tearout instead of dust. The safe edges have no teeth so will not damage adjacent areas. This file is the perfect tool to dial in the width of a tenon without damaging the shoulder or to refine a wooden plane bed. The teeth are ground and then hardened so will stay sharp for a very long time.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777624662344,"sku":"B08JD3NXKB","price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-f2a1af6048c9.jpg?v=1786700103"},{"product_id":"narex-bevel-edge-chisel-set-with-wooden-handles-set-of-4-pcs","title":"Narex Bevel Edge Chisel Set with Wooden Handles, Set of 4 pcs","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThese are high quality chisels suitable for those prefering tradition and style in woodworking. The blades are made from fine-grained, nicely tempered Cr-Mn steel and hardened to Rc 59. The blades are sharpened but as with all edge tools, they'll need some more sharpening before use. The blades take and hold an excellent edge. Blade sizes are: 6mm, 12mm, 20mm \u0026amp; 26mm. The handles are ergonomic with oval cross-section made from clear varnished wood. They are equiped with steel ferrule and hoop.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777625776456,"sku":"B00GPC74ZQ","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-3f61a803babe.jpg?v=1786700105"},{"product_id":"narex-150-mm-6-inch-half-round-cabinetmaker-wood-coarse-cut-rasp-872521","title":"Narex 150 mm (6 Inch) Half Round Cabinetmaker Wood Coarse Cut Rasp 872521","description":"\u003cdiv class=\"text\"\u003e\n            This 150 mm (6”) half round coarse cut rasp is made by a highly respected cutting tool tool manufacturer in the Czech Republic and is of exceptional quality. The blade is made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. This is considered a coarse cut rasp with 16 teeth per square centimeter. The handle is 5 3\/4 inch long, 1 1\/2 inches in diameter and has a solid brass ferrule. Handle is made hard and dense Hornbeam. Blade is 16 mm (5\/8\") wide by 5 mm (3\/16\") thick and 150 mm (6\") long. Overall length is 295 mm (12\"). This is a well-made rasp for a very reasonable price.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777631347016,"sku":"B01GN6QB8Y","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-12bded16b95f.jpg?v=1786700117"},{"product_id":"narex-1-4-inch-unhandled-premium-chisel-blank-1-4-inch","title":"Narex 1\/4 Inch Unhandled Premium Chisel Blank (1\/4 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777634754888,"sku":"B07T8ZHN54","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-4b1847142873.jpg?v=1786700123"},{"product_id":"narex-premium-cranked-neck-chisel-1-4-1-2-3-4-and-1-with-hornbeam-handles-813307-813325-1-4","title":"Narex Premium Cranked Neck Chisel 1\/4\", 1\/2\", 3\/4\", and 1\" with Hornbeam Handles 813307-813325 (1\/4\")","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThese Crank Neck chisels are made by a highly respected cutting tool manufacturer in the Czech Republic and are of exceptional quality. Due to the 30 degree offset handle, these chisels can access hard to reach areas that other chisels cannot touch. They are also perfect for flush trimming. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. Cutting edges are ground at a 25 degree bevel. Blades are 4 1\/2 inches to 5 1\/2 inches long. Handles are stained Hornbeam and 5 inches long. Overall sizes range in length from 9 3\/4 inches to 10 1\/2 inches. Blades have well-seated heavy steel tangs and handles have a solid brass ferrule. As with all edge tools, they will need final honing before use. These chisels are an excellent value in a good quality tool.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777634787656,"sku":"B01GURLABE","price":101.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-4096d9c818dc.jpg?v=1786700123"},{"product_id":"narex-czech-steel-profi-professional-woodworking-cabinetmakers-chisel-with-european-beech-wood-handle-sizes-from-3-mm-to-50-mm-6-mm-1-4","title":"Narex Czech Steel Profi Professional Woodworking Cabinetmakers Chisel with European Beech Wood Handle Sizes from 3 mm to 50 mm (6 mm - 1\/4\")","description":"\u003cdiv class=\"text\"\u003e\n            Narex Profi (Professionsl) Woodworking Chisels This Narex Profi (Professional) line of Narex chisels has lacquered European Beech handles. Primary bevels are ground at 25 degrees. Blades are 4 ½” to 6 ½” long. Handles are 4 ½” to 5 ¼” long. Overall sizes range in length from 9 7\/8” to 11 ¾”. Widths are available from 3 mm to 50 mm. Blades have well seated steel tangs. Handles have 2 steel ferrules to withstand vigorous mallet work. These chisels are an excellent value in a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777637310792,"sku":"B01GLM7FZS","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-c0363373016b.jpg?v=1786700127"},{"product_id":"narex-woodturning-lathe-chisels-set-of-6-pcs","title":"Narex Woodturning Lathe Chisels - Set of 6 pcs","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eWoodturning chisels STANDARD LINE are made of quality tool steel, heat treated up to 60 HRc. Blades are fully ground and sharpened. Ergonomic round handles made of beech wood have dimensions 240 x 30mm.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777637867848,"sku":"B000YKHJZU","price":318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-7dbd35929866.jpg?v=1786700129"},{"product_id":"narex-200-mm-8-inch-rectangular-flat-cabinetmaker-wood-coarse-cut-rasp-872502","title":"Narex 200 mm (8 Inch) Rectangular Flat Cabinetmaker Wood Coarse Cut Rasp 872502","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eRectangular woodworking rasps made by Narex Bystrice in the Czech Republic. Narex is a highly respected tool manufacturer and has been making exceptional quality edge tools for over 95 years. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. Handles are made from hard and dense European Hornbeam with solid brass ferrules. Blade dimensions 20mm x 5mm, Total length 345mm, Teeth Roughness 16cm2 Handle length: 145mm (5-3\/4 inch) Handle diameter: 36mm (1-1\/2 inch) Teeth pattern: coarse\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777642389832,"sku":"B01GN6UOMI","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-9ef2dba3e3ca.jpg?v=1786700135"},{"product_id":"narex-1-8-inch-unhandled-premium-chisel-1-8-inch","title":"Narex 1\/8 Inch Unhandled Premium Chisel (1\/8 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777648714056,"sku":"B07T7ZQ87L","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-2c2750ad8f3b.jpg?v=1786700145"},{"product_id":"narex-engineer-half-round-files-double-cut-25mm-x-8mm","title":"Narex Engineer Half-Round Files Double Cut (25mm x 8mm)","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eUpgrade your toolkit with Narex Classic Engineer Files, meticulously crafted for both shop and household applications. These traditional files are designed to handle metalwork, wood shaping, and plastic smoothing with precision and ease. Ideal for jointing scrapers and handsaws, they offer excellent versatility and durability. Constructed from high-quality carbon steel and heat-treated to 62 HRc, the blades deliver superior strength and sharpness. The ergonomic handles, made from lacquered European beech wood and fitted with solid brass tapered ferrules, provide comfort and durability during use. Graded as \"medium cut,\" these double-cut files feature intersecting diagonal teeth that allow for aggressive material removal and smooth finishing. As the files increase in length, their aggressiveness improves. The set includes half-round and \"rattail\" files, which taper slightly toward the point for easy access to tight internal spaces. Proudly made in the Czech Republic, Narex Classic Engineer Files combine traditional craftsmanship with modern performance for reliable results.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777649729864,"sku":"B0DGMCDKRR","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-1fec4f70ffcd.jpg?v=1786700146"},{"product_id":"narex-richter-bevel-edge-chisel-1-1-2-39mm","title":"Narex Richter Bevel Edge Chisel 1 1\/2\" (39mm)","description":"\u003cdiv class=\"text\"\u003e\n            Right after initial hardening, cryogenic treatment cools the steel down to very low temperatures by using liquid nitrogen to as low as −190 °C. This completes transformation of austenite, which increases both the hardness and toughness of the steel. Named after our founder Mr. Vaclav Richter, these chisels represent the highest quality of our manufacturing processes combining unique materials, heat treatment and machining in order to produce the finest tool for woodworkers. Every chisel is marked by our trademark RICHTER EXTRA.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777651007816,"sku":"B082FNR6TC","price":167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-86ad155e72c5.jpg?v=1786700148"},{"product_id":"narex-825801-round-turned-680-gram-18-oz-hornbeam-wood-carving-woodworking-mallet","title":"Narex 825801 Round Turned 680 gram 18 oz Hornbeam Wood Carving Woodworking Mallet","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis is a sturdy and durable mallet made of super dense European Hornbeam wood that can withstand the heaviest blows. This wood carving mallet is made by a Narex, a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Head diameter 3-1\/2 inches, overall length 9-1\/8 inches and weight 18 ounces or 680 grams. Wood is oiled European hornbeam.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777651106120,"sku":"B0BB8J611P","price":122.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-e7b91e5dbdd5.jpg?v=1786700150"},{"product_id":"richter-bevel-edge-chisel-19mm","title":"Richter Bevel Edge Chisel - 19mm","description":"\u003cdiv class=\"text\"\u003e\n            Right after initial hardening, cryogenic treatment cools the steel down to very low temperatures by using liquid nitrogen to as low as −190 °C. This completes transformation of austenite, which increases both the hardness and toughness of the steel. Named after our founder Mr. Vaclav Richter, these chisels represent the highest quality of our manufacturing processes combining unique materials, heat treatment and machining in order to produce the finest tool for woodworkers. Every chisel is marked by our trademark RICHTER EXTRA.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777653858632,"sku":"B082FPL2DX","price":111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-4a6eb903dd4f.jpg?v=1786700154"},{"product_id":"narex-richter-bevel-edge-chisel-set-of-5","title":"Narex Richter Bevel Edge Chisel Set of 5","description":"\u003cdiv class=\"text\"\u003e\n            Right after initial hardening, cryogenic treatment cools the steel down to very low temperatures by using liquid nitrogen to as low as −190 °C. This completes transformation of austenite, which increases both the hardness and toughness of the steel. Named after our founder Mr. Vaclav Richter, these chisels represent the highest quality of our manufacturing processes combining unique materials, heat treatment and machining in order to produce the finest tool for woodworkers. Every chisel is marked by our trademark RICHTER EXTRA.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777653956936,"sku":"B082FPB1Q5","price":408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-c4c3a7bb37a6.jpg?v=1786700155"},{"product_id":"narex-815075-1-inch-richter-extra-unhandled-bevel-edge-chisel-blank-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-stainless-steel-ferrules-1-inch","title":"Narex 815075 1 inch Richter Extra Unhandled Bevel Edge Chisel Blank, Cryogenic Treated Cr-V Steel Hardened to HRc 62, Stainless Steel Ferrules (1 inch)","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eYears ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who is better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are made in the Narex factory in the small village of Bystrice in the Czech Republic. The Narex factory was founded in 1919 by Mr. Vaclav Richter, a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making an extensive range of high quality, reasonably priced bench chisels. While the Narex factory has modernized a great deal over the past century, it still retains many traditional manufacturing methods. Chisels are still produced in the original Bystrice factory site using old-world drop-forging techniques which greatly enhance the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra premium bench chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels is made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel on the market today. BLADES: Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Cryogenic treatment cools the steel down to −190° C (-310° F) using liquid nitrogen which alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides (.5mm) allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The front bevel is ground at 24 degrees. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8\" pilot hole works well for most American compressive hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid stainless ferrule and a leather shock washer. Stainless steel ferrules have an OD of 0.750\", ID of 0.670\", and height of 0.710\". The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle. Each ferrule has a lasered Richter logo.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777656774984,"sku":"B0C2DHJJGZ","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-fd51e09f40df.jpg?v=1786700161"},{"product_id":"narex-8-mm-5-16-inch-round-cabinetmaker-wood-rat-tail-coarse-cut-rasp-872512","title":"Narex 8 mm (5\/16 Inch) Round Cabinetmaker Wood Rat Tail Coarse Cut Rasp 872512","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eRound woodworking rasps made by Narex Bystrice in the Czech Republic. Narex is a highly respected tool manufacturer and has been making exceptional quality edge tools for over 95 years. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. Handles are made from hard and dense European Hornbeam with solid brass ferrules. Length 200mm\/8 inch, Diameter 8mm(5\/16 inch), Total length 345mm, Teeth roughness 16cm2 Handle length: 145mm (5-3\/4 inch) Handle diameter: 36mm (1-1\/2 inch)\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777658478920,"sku":"B00IXWC2P8","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-581a2e27ddaf.jpg?v=1786700164"},{"product_id":"narex-1-2-inch-unhandled-premium-chisel-1-2-inch","title":"Narex 1\/2 Inch Unhandled Premium Chisel (1\/2 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777658904904,"sku":"B07T925153","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-1bb55d1876bd.jpg?v=1786700164"},{"product_id":"narex-1-inch-unhandled-premium-chisel-blank-1-inch","title":"Narex 1 Inch Unhandled Premium Chisel Blank (1 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777659625800,"sku":"B07T7YHBQF","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-4af7051a7f00.jpg?v=1786700165"},{"product_id":"narex-6-piece-set-unhandled-premium-chisel-6-pc-set-1-8-1-4-3-8-1-2-3-4-and-1-inch","title":"Narex 6 Piece Set Unhandled Premium Chisel (6 pc set 1\/8, 1\/4, 3\/8, 1\/2. 3\/4 and 1 Inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777660248392,"sku":"B07T816DN9","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-55e72984522c.jpg?v=1786700167"},{"product_id":"narex-279106-set-square-blade-and-round-scratch-awl-blades-cr-v-steel-5-1-4-inch-long-blades-only","title":"Narex 279106 Set Square Blade and Round Scratch Awl Blades Cr-V Steel 5-1\/4 Inch Long Blades Only","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eMake a set of square and round scratch awls to your own unique design using this piece awl kit. This kit is made by Narex of the Czech Republic and is of exceptional quality. The blade is made from Chrome Vandium Cr-V steel and heat treated to 61 HRc. Blade tips are ground and sharpened and ready to use. Epoxy blades in place for a secure fit. Brass ferrules are OD 0.471\" and ID 0.0435\" and 0.361\" long. Ferrules are proper ferrules with inside bevels and annealed so will not split with wood movement. This awl kit is an excellent value for a good quality tool. Blade diameter: 6mm (0.23\") Blade length: 135mm (5.25\")\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777664475464,"sku":"B07T4TJPCW","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-92c8fa8b63b3.jpg?v=1786700175"},{"product_id":"narex-beech-wood-carving-mallet-11-oz-300g-12-inches-unfinished-european-beech","title":"Narex Beech Wood Carving Mallet, 11 oz (300g), 12 inches, Unfinished European Beech","description":"\u003cdiv class=\"text\"\u003e\n            This solid wood carving mallet is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. Specifications are as follows: Head Size: 4 3\/4\" long by 2 1\/4\" diameter Overall Length: 12\" (300 mm) Head and handle material unfinished European Beech Total Weight: 11 oz (300g)        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777674469704,"sku":"B0012YYI1U","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-33aba06b4a1e.jpg?v=1786700191"},{"product_id":"narex-czech-steel-profi-professional-woodworking-cabinetmakers-chisel-with-european-beech-wood-handle-sizes-from-3-mm-to-50-mm-4-mm-5-32","title":"Narex Czech Steel Profi Professional Woodworking Cabinetmakers Chisel with European Beech Wood Handle Sizes from 3 mm to 50 mm (4 mm - 5\/32\")","description":"\u003cdiv class=\"text\"\u003e\n            Narex Profi (Professionsl) Woodworking Chisels This Narex Profi (Professional) line of Narex chisels has lacquered European Beech handles. Primary bevels are ground at 25 degrees. Blades are 4 ½” to 6 ½” long. Handles are 4 ½” to 5 ¼” long. Overall sizes range in length from 9 7\/8” to 11 ¾”. Widths are available from 3 mm to 50 mm. Blades have well seated steel tangs. Handles have 2 steel ferrules to withstand vigorous mallet work. These chisels are an excellent value in a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777683120456,"sku":"B01GLM7G70","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-7e1d52bdf3c1.jpg?v=1786700213"},{"product_id":"narex-3-mm-1-8-inch-woodworking-cabinetmakers-chisel-with-beech-handle-810103","title":"Narex 3 mm (1\/8 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810103","description":"\u003cdiv class=\"text\"\u003e\n            This chisel is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. The blade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blade will take and hold an excellent edge. The blade is accurately ground. As with all fine edge tool, it will need sharpening\/honing before use. This chisel is an excellent value in a good quality tool. This blade is 3 mm (1\/8”) wide and is 4 5\/8” long. The handle is made from European Beech and is 5 1\/2\" long. Overall length is 10\". Bevel is ground at a 25 degree bevel. The blade has a well-seated heavy steel tang and the handle has 2 ferrules to withstand vigorous mallet work.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777684103496,"sku":"B00V922QT6","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-0682777d1fa5.jpg?v=1786700215"},{"product_id":"narex-richter-bevel-edge-chisel-1-8","title":"Narex Richter Bevel Edge Chisel - 1\/8\"","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eTo commemorate its 100 anniversary, Narex developed a new line of Richter Extra premium bench chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100 year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel on the market today. BLADES: Richter chisel blades are made from the highest quality Chrome Vanadium (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The front bevel is ground at 24 degrees. CRYOGENIC TREATMENT: Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310° F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance. HANDLES: Richter chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows. LIFETIME GUARANTEE Narex Richter Chisels come with a lifetime guarantee. In the case of a manufacturer defect in material, design or construction, a free replacement or repair will be provided. This guarantee will be void and compensation will not be made if products are damaged due to carelessness, neglect or inappropriate use.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777685348680,"sku":"B082FNVGN4","price":117.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-789f9e8dfb8c.jpg?v=1786700217"},{"product_id":"narex-richter-extra-bevel-edge-chisel-with-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-ergonomic-ash-handles-stainless-steel-ferrule-1-4-inch","title":"Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1\/4 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Narex, from the small village of Bystrice in the Czech Republic, has been making world-class tools for 100 years. The Narex factory was founded in 1919 by Mr. Vaclav Richter a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making high quality, reasonably priced bench chisels. While the Narex factory has modernized much over the past century, it still retains many traditional manufacturing methods. Chisels are still produced using old-world drop-forging techniques which greatly enhances the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100 year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel available in the world today. Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The backs are ground flat to the smallest production tolerances, requiring minimal flattening during initial sharpening. Bevel ground at 24 degrees. Following hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.Handles made of domestically and responsibly harvested European Ash with stainless steel ferrules,        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777694720328,"sku":"B082FNXZJT","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-67bc0bed5343.jpg?v=1786700237"},{"product_id":"narex-50-mm-2-inch-woodworking-cabinetmakers-chisel-with-beech-handle-810150","title":"Narex 50 mm (2 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810150","description":"\u003cdiv class=\"text\"\u003e\n            This chisel is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. The blade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blade will take and hold an excellent edge. The blade is accurately ground. As with all fine edge tool, it will need sharpening\/honing before use. This chisels is an excellent value in a good quality tool. This blade is 50 mm (2”) wide and is 6 inches long. The handle is made from European Beech and is 5 inches long. Overall length is 12 inches;. Bevel is ground at a 25 degree bevel. The blade has a well-seated heavy steel tang and the handle has 2 ferrules to withstand vigorous mallet work.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777698718024,"sku":"B00V92MIIU","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-82554d8e1256.jpg?v=1786700246"},{"product_id":"narex-460-gram-16-oz-beech-wood-carving-mallet","title":"Narex 460 gram 16 oz Beech Wood Carving Mallet","description":"\u003cdiv class=\"text\"\u003e\n            This solid wood carving mallet is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. Specifications are as follows: Head Size: 4 1\/4\" x 3\" x 2 1\/4\" thick Head has 5 degree angle to ensure a square strike each time Head has chamfered edges to prevent splintering. Overall Length: 11\" (275 mm) Head and handle material unfinished European Beech Total Weight: 16 oz (460g)        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777705402696,"sku":"B00L7BQL54","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-ad3e34f7e473.jpg?v=1786700257"},{"product_id":"narex-875151-bounceless-deadblow-assembly-mallet-with-replaceable-plastic-faces-7-ounces-overall-length-10-4-inches","title":"Narex 875151 Bounceless Deadblow Assembly Mallet with Replaceable Plastic Faces 7 Ounces Overall Length 10.4 Inches","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis non-marring assembly, bounceless mallet with replaceable plastic ends is suitable for woodworkers, carpenters, machinists, locksmiths and sheet metal workers. This bounceless mallet features an ANTIREFLEX counterweight damping filling that prevents bounce-back during each blow increased safety. The handle of the mallet is made of tough and ridged polypropylene plastic. Overall length is 10.4 inches with 1 inch round faces. Weight is 7 ounces.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777717789000,"sku":"B09TBH2W24","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-b59cde6e5f42.jpg?v=1786700289"},{"product_id":"narex-thin-blade-dual-double-bevel-striking-marking-knife-with-blade-from-hardened-mn-v-steel-heat-treated-to-hrc-61-822302","title":"Narex Thin Blade Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822302","description":"\u003cdiv class=\"text\"\u003e\n            This marking\/striking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Blade is made from Mn-V steel and heat treated to HRc 61. Handle is of European Hornbeam with a solid brass ferrule. Blade is .055\" thick, .410\" wide and 1.5\" long. Double bevel sharpened at 20 degrees and tip ground to 55 degrees. Knife comes super sharp and ready for use. This knife an excellent value for a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777718903112,"sku":"B01N2XVTXM","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-eade75fe1457.jpg?v=1786700296"},{"product_id":"narex-3-8-inch-unhandled-premium-chisel-blank-3-8-inch","title":"Narex 3\/8 Inch Unhandled Premium Chisel Blank (3\/8 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Years ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are manufactured by Narex in the Czech Republic and are of exceptional quality. Narex is regarded worldwide as a premier edge tool manufacturer. These blades are made from fine-grained chrome-manganese steel that is first drop forged and then hardened and tempered to a Rockwell hardness of 59. These blades are easily sharpened and hold an exceptional edge. The blades are accurately CNC ground with slimmer cross section sidewalls that are just 1.4 mm or .040” wide. These slimmer sideways allow reach into tight spaces, making them perfect for dovetailing. Bevels are ground to 25 degrees. For optimal performance the backs will need flattened and the bevels sharpened. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8” pilot hole works well for most American hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid brass ferrule and a leather shock washer. Brass ferrules have an OD of 0.750, ID of 0.667” and height of 0.667”. The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777719001416,"sku":"B07T7KTXVD","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-7fa6b9170e34_72ebf98e-6133-493e-b06f-4ae81eb3a21b.jpg?v=1786700297"},{"product_id":"narex-richter-extra-bevel-edge-chisel-with-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-ergonomic-ash-handles-stainless-steel-ferrule-1-2-inch","title":"Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1\/2 inch)","description":"\u003cdiv class=\"text\"\u003e\n            Narex, from the small village of Bystrice in the Czech Republic, has been making world-class tools for 100 years. The Narex factory was founded in 1919 by Mr. Vaclav Richter a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making high quality, reasonably priced bench chisels. While the Narex factory has modernized much over the past century, it still retains many traditional manufacturing methods. Chisels are still produced using old-world drop-forging techniques which greatly enhances the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100 year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel available in the world today. Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The backs are ground flat to the smallest production tolerances, requiring minimal flattening during initial sharpening. Bevel ground at 24 degrees. Following hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.Handles made of domestically and responsibly harvested European Ash with stainless steel ferrules,        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777719918920,"sku":"B082FNNNY2","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-bde5b8d27960.jpg?v=1786700302"},{"product_id":"selpont-52-bounceless-deadblow-assembly-mallet-with-replaceable-plastic-faces-12-8-ounces-overall-length-11-4-inches","title":"SELPONT 52 Bounceless Deadblow Assembly Mallet with Replaceable Plastic Faces 12.8 Ounces Overall Length 11.4 Inches","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis non-marring assembly, bounceless mallet with replaceable plastic ends is suitable for woodworkers, carpenters, machinists, locksmiths and sheet metal workers. This bounceless mallet features an ANTIREFLEX counterweight damping filling that prevents bounce-back during each blow increased safety. The handle of the mallet is made of tough and ridged polypropylene plastic. Overall length is 11.4 inches with 1-3\/8 inch round faces. Weight is 12.8 ounces.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777720344904,"sku":"B08TYT59FT","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-47270d244e25.jpg?v=1786700305"},{"product_id":"narex-853655-5-piece-set-of-richter-extra-bevel-edge-chisel-without-box-1-4-3-8-1-2-3-4-and-1-inch-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-ergonomic-ash-handles-stainless-steel-ferrules","title":"Narex 853655 5 Piece Set of Richter Extra Bevel Edge Chisel without Box (1\/4, 3\/8, 1\/2, 3\/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eNarex, from the small village of Bystrice in the Czech Republic, has been making world-class tools for 100 years. The Narex factory was founded in 1919 by Mr. Vaclav Richter a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making high quality, reasonably priced bench chisels. While the Narex factory has modernized much over the past century, it still retains many traditional manufacturing methods. Chisels are still produced using old-world drop-forging techniques which greatly enhances the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100 year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel available in the world today. Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. Bevel ground at 24 degrees. Following hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.Handles made of domestically and responsibly harvested European Ash with solid stainless steel ferrules.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777725358408,"sku":"B0BL5FRRJX","price":443.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-7264927daeac.jpg?v=1786700330"},{"product_id":"narex-czech-steel-profi-professional-woodworking-cabinetmakers-chisel-with-european-beech-wood-handle-sizes-from-3-mm-to-50-mm-10-mm-3-8","title":"Narex Czech Steel Profi Professional Woodworking Cabinetmakers Chisel with European Beech Wood Handle Sizes from 3 mm to 50 mm (10 mm - 3\/8)","description":"\u003cdiv class=\"text\"\u003e\n            Narex Profi (Professionsl) Woodworking Chisels This Narex Profi (Professional) line of Narex chisels has lacquered European Beech handles. Primary bevels are ground at 25 degrees. Blades are 4 ½” to 6 ½” long. Handles are 4 ½” to 5 ¼” long. Overall sizes range in length from 9 7\/8” to 11 ¾”. Widths are available from 3 mm to 50 mm. Blades have well seated steel tangs. Handles have 2 steel ferrules to withstand vigorous mallet work. These chisels are an excellent value in a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777727455560,"sku":"B01GLM7FCG","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-7e1d52bdf3c1_2a2b06e8-8a87-4d24-bacf-000ff14a8c1f.jpg?v=1786700343"},{"product_id":"narex-czech-steel-profi-professional-woodworking-cabinetmakers-chisel-with-european-beech-wood-handle-sizes-from-3-mm-to-50-mm-12-mm-1-2","title":"Narex Czech Steel Profi Professional Woodworking Cabinetmakers Chisel with European Beech Wood Handle Sizes from 3 mm to 50 mm (12 mm - 1\/2\")","description":"\u003cdiv class=\"text\"\u003e\n            Narex Profi (Professionsl) Woodworking Chisels This Narex Profi (Professional) line of Narex chisels has lacquered European Beech handles. Primary bevels are ground at 25 degrees. Blades are 4 ½” to 6 ½” long. Handles are 4 ½” to 5 ¼” long. Overall sizes range in length from 9 7\/8” to 11 ¾”. Widths are available from 3 mm to 50 mm. Blades have well seated steel tangs. Handles have 2 steel ferrules to withstand vigorous mallet work. These chisels are an excellent value in a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777727521096,"sku":"B01GLM7FBM","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-f1d562c2d547.jpg?v=1786700343"},{"product_id":"narex-889302-promotional-bottle-opener-5-1-4-inch-long-thermoplastic-soft-grip-handle","title":"Narex 889302 Promotional Bottle Opener 5-1\/4 Inch Long Thermoplastic Soft-Grip Handle","description":"\u003cdiv class=\"text\"\u003e\n            Narex bottle opener 5-1\/4 inch long Molded thermoplastic soft-grip handle Perfect for the DIYer who has everything        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777729421640,"sku":"B07SZHQV7W","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-d7b64becb8e4.jpg?v=1786700353"},{"product_id":"narex-dual-bevel-marking-knife-stainless-steel-blade-rosewood-handle-finger-indents-0-030-thick-blade","title":"Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents (0.030\" Thick Blade)","description":"\u003cdiv class=\"text\"\u003e\n            A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7\/8 inches long, 1\/2 inch wide and comes in 3 thicknesses, 0.030\", 0.060\" or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins\/tails marks during dovetailing. The handle is 3\/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench. Knife specs: Blade material: AISI 420 stainless steel hardened HRC 57\nBlade profile: finger indents\nBlade length 1-7\/8”\nBlade thickness: 0.030”, 0.060” or 0.100”\nBlade width: 1\/2”\nHandle length 4”\nOverall length 5-7\/8\nHandle size: 3\/8” thick by 1\/2” wide\nHandle: Mexican Rosewood        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777731092808,"sku":"B0959XGZVV","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-69e5d9e32444.jpg?v=1786700361"},{"product_id":"narex-875153-bounceless-deadblow-assembly-mallet-with-replaceable-plastic-faces-19-5-ounces-overall-length-12-inches","title":"Narex 875153 Bounceless Deadblow Assembly Mallet with Replaceable Plastic Faces 19.5 Ounces Overall Length 12 Inches","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis non-marring assembly, bounceless mallet with replaceable plastic ends is suitable for woodworkers, carpenters, machinists, locksmiths and sheet metal workers. This bounceless mallet features an ANTIREFLEX counterweight damping filling that prevents bounce-back during each blow increased safety. The handle of the mallet is made of tough and ridged polypropylene plastic. Overall length is 12” with 2” round faces. Weight is 19.5 ounces\/552g.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777731912008,"sku":"B08NXX3XXM","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-365036fe47c4.jpg?v=1786700364"},{"product_id":"narex-815053-1-8-inch-richter-extra-unhandled-bevel-edge-chisel-blank-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-stainless-steel-ferrule-1-8-inch","title":"Narex 815053 1\/8 Inch Richter Extra Unhandled Bevel Edge Chisel Blank, Cryogenic Treated Cr-V Steel Hardened to HRc 62, Stainless Steel Ferrule… (1\/8 Inch)","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eYears ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who is better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are made in the Narex factory in the small village of Bystrice in the Czech Republic. The Narex factory was founded in 1919 by Mr. Vaclav Richter, a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making an extensive range of high quality, reasonably priced bench chisels. While the Narex factory has modernized a great deal over the past century, it still retains many traditional manufacturing methods. Chisels are still produced in the original Bystrice factory site using old-world drop-forging techniques which greatly enhance the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra premium bench chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels is made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel on the market today. BLADES: Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Cryogenic treatment cools the steel down to −190° C (-310° F) using liquid nitrogen which alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides (.5mm) allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The front bevel is ground at 24 degrees. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8\" pilot hole works well for most American compressive hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid stainless ferrule and a leather shock washer. Stainless steel ferrules have an OD of 0.750\", ID of 0.670\", and height of 0.710\". The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle. Each ferrule has a lasered Richter logo.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777732436296,"sku":"B0C2DFYQZ7","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-a0762eb59f42.jpg?v=1786700367"},{"product_id":"narex-dual-bevel-marking-knife-stainless-steel-blade-rosewood-handle-finger-indents-0-060-thick-blade","title":"Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents (0.060\" Thick Blade)","description":"\u003cdiv class=\"text\"\u003e\n            A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7\/8 inches long, 1\/2 inch wide and comes in 3 thicknesses, 0.030\", 0.060\" or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins\/tails marks during dovetailing. The handle is 3\/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench. Knife specs: Blade material: AISI 420 stainless steel hardened HRC 57\nBlade profile: finger indents\nBlade length 1-7\/8”\nBlade thickness: 0.030”, 0.060” or 0.100”\nBlade width: 1\/2”\nHandle length 4”\nOverall length 5-7\/8\nHandle size: 3\/8” thick by 1\/2” wide\nHandle: Mexican Rosewood        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777736565064,"sku":"B0959LBB4K","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-d64ed3d9bf5f.jpg?v=1786700383"},{"product_id":"narex-wood-chisel-set-of-4-8-10-16-32-with-dark-handle","title":"Narex Wood Chisel Set of 4 (8\/10\/16\/32) with Dark Handle","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eA set of 4 wood chisels from Narex. The blades have been made from chrome manganese steel and heat treated up to 59 HRC. They are already sharpened and ready to use and feature an ergonomic stained and stained waxed wood handle. Capacity: Width: 8 mm, Blade Length: 122 mm, Handle: 138 x 34 mm Width: 10 mm, Blade Length: 124 mm, Handle: 138 x 34 mm Width: 16 mm, Blade Length: 130 mm, Handle 140 x 34 mm Width 32 mm, Blade Length 146 mm, Handle 140 x 34 mm\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777739120968,"sku":"B0751D88DB","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-421c71a59324.jpg?v=1786700397"},{"product_id":"narex-815063-1-2-inch-richter-extra-unhandled-bevel-edge-chisel-blank-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-stainless-steel-ferrules-1-2-inch","title":"Narex 815063 1\/2 inch Richter Extra Unhandled Bevel Edge Chisel Blank, Cryogenic Treated Cr-V Steel Hardened to HRc 62, Stainless Steel Ferrules (1\/2 inch)","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eYears ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who is better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are made in the Narex factory in the small village of Bystrice in the Czech Republic. The Narex factory was founded in 1919 by Mr. Vaclav Richter, a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making an extensive range of high quality, reasonably priced bench chisels. While the Narex factory has modernized a great deal over the past century, it still retains many traditional manufacturing methods. Chisels are still produced in the original Bystrice factory site using old-world drop-forging techniques which greatly enhance the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra premium bench chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels is made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel on the market today. BLADES: Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Cryogenic treatment cools the steel down to −190° C (-310° F) using liquid nitrogen which alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides (.5mm) allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The front bevel is ground at 24 degrees. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8\" pilot hole works well for most American compressive hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid stainless ferrule and a leather shock washer. Stainless steel ferrules have an OD of 0.750\", ID of 0.670\", and height of 0.710\". The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle. Each ferrule has a lasered Richter logo.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777740661064,"sku":"B0C2DJYRPQ","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-68b65e5e94f0.jpg?v=1786700412"},{"product_id":"narex-czech-steel-profi-professional-woodworking-cabinetmakers-chisel-with-european-beech-wood-handle-sizes-from-3-mm-to-50-mm-32-mm-1-1-4","title":"Narex Czech Steel Profi Professional Woodworking Cabinetmakers Chisel with European Beech Wood Handle Sizes from 3 mm to 50 mm (32 mm - 1 1\/4\")","description":"\u003cdiv class=\"text\"\u003e\n            Narex Profi (Professionsl) Woodworking Chisels This Narex Profi (Professional) line of Narex chisels has lacquered European Beech handles. Primary bevels are ground at 25 degrees. Blades are 4 ½” to 6 ½” long. Handles are 4 ½” to 5 ¼” long. Overall sizes range in length from 9 7\/8” to 11 ¾”. Widths are available from 3 mm to 50 mm. Blades have well seated steel tangs. Handles have 2 steel ferrules to withstand vigorous mallet work. These chisels are an excellent value in a good quality tool.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777742594376,"sku":"B01GLM7FDA","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-68260164377a.jpg?v=1786700423"},{"product_id":"narex-872532-hand-cut-stitched-10-inch-cabinet-makers-rasp-medium-cut-15-1-2-inches-overall-european-hornbeam-handle","title":"Narex 872532 Hand Cut Stitched 10 Inch Cabinet Maker's Rasp Medium Cut 15-1\/2 Inches Overall European Hornbeam Handle","description":"\u003cdiv class=\"text\"\u003e\n            This hand cut rasp is made by Narex Bystrice of the Czech Republic who has been in the business of making premium edge tools for near a century. Cabinet maker's rasps are generally used for shaping work and can remove a lot of material and leave a smooth surface. The rasp blank is forged and then carefully ground to final shape. The teeth are carefully stitched by hand to a uniform height, but with a slightly irregular pattern. This allows the rasp to cut quickly yet leave an even surface with no scratch pattern. Blades are stitched right to the edge to allow working in tight corners. This rasp will work equally well with both right and left handers. Blade is 10” long. In cross-section, the blade is curved on the top and flat on the back. Handle is 5-1\/2” x 1-3\/8” round made from dense European Hornbeam. Overall length is 15-1\/2”. Blade is 1-1\/8” at its widest and tapers to 3\/4”. Tooth pattern is considered medium with 30 teeth per square centimeter or 192 per square inch. This is a great value for a well-made hand-cut rasp.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777742954824,"sku":"B079R8PQX9","price":262.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-5dd34fe4c2d8.jpg?v=1786700427"},{"product_id":"set-of-6-narex-richter-chisels-by-the-woodworking-club","title":"Set of 6 Narex Richter chisels by The Woodworking Club","description":"\u003cdiv class=\"text\"\u003e\n            Right after initial hardening, cryogenic treatment cools the steel down to very low temperatures by using liquid nitrogen to as low as −190 °C. This completes transformation of austenite, which increases both the hardness and toughness of the steel. Named after our founder Mr. Vaclav Richter, these chisels represent the highest quality of our manufacturing processes combining unique materials, heat treatment and machining in order to produce the finest tool for woodworkers. Every chisel is marked by our trademark RICHTER EXTRA.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777743020360,"sku":"B08M3XKFKS","price":538.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-36a06a3f5625.jpg?v=1786700425"},{"product_id":"12-inches-long-overall-length-15-3-4-inchesl8-c","title":"Wood Rasp File, 12-Inch Blade, 15-3\/4-Inch Overall Length, Coarse Cut, Ergonomic Wood Handle","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eThis curved tooth mill file is designed for shaping wood, easing edges and refining joinery. The teeth are milled with a slight arc or curve which allows them to cut aggressively but still leave a surprisingly fine finish. The teeth cut by shearing wood instead of abrading it which produce small shavings and no tearout instead of dust. The safe edges have no teeth so will not damage adjacent areas. This file is the perfect tool to dial in the width of a tenon without damaging the shoulder or to refine a wooden plane bed. The teeth are ground and then hardened so will stay sharp for a very long time.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777744888136,"sku":"B08JD7GQ2W","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-507200a4f90f.jpg?v=1786700430"},{"product_id":"narex-815069-3-4-inch-richter-extra-unhandled-bevel-edge-chisel-blank-cryogenic-treated-cr-v-steel-hardened-to-hrc-62-stainless-steel-ferrule-3-4-inch","title":"Narex 815069 3\/4 Inch Richter Extra Unhandled Bevel Edge Chisel Blank, Cryogenic Treated Cr-V Steel Hardened to HRc 62, Stainless Steel Ferrule… (3\/4 Inch)","description":"\u003cdiv class=\"text\"\u003e\n            \u003cp\u003eYears ago, it was common practice to sell unhandled tools. Craftsmen bought chisel blades then fashioned their own handles to meet their specific needs. This made perfect sense as who is better suited to make wood chisel handles than craftsman. Craftsman were able to make handles that better fit their hands, were designed for the task at hand and that used whatever wood was readily available. A custom handle can be turned on the lathe from your favorite wood in a few minutes. Even without a lathe, a handle can be quickly shaped using a rasp, chisel, drawknife or spokeshave. These unhandled chisel blades are made in the Narex factory in the small village of Bystrice in the Czech Republic. The Narex factory was founded in 1919 by Mr. Vaclav Richter, a local blacksmith who began producing chisels and gimlets. To this day, Narex is best known for making an extensive range of high quality, reasonably priced bench chisels. While the Narex factory has modernized a great deal over the past century, it still retains many traditional manufacturing methods. Chisels are still produced in the original Bystrice factory site using old-world drop-forging techniques which greatly enhance the strength and durability of the steel. To commemorate its 100 anniversary, Narex developed a new line of Richter Extra premium bench chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels is made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes. The new line of Richter Extra chisels will rival any premium chisel on the market today. BLADES: Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Cryogenic treatment cools the steel down to −190° C (-310° F) using liquid nitrogen which alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance. Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides (.5mm) allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails. The front bevel is ground at 24 degrees. Blanks come with square, untapered tangs. The tang hole must be properly sized to ensure a tight fit without splitting the handle. In general, a 3\/8\" pilot hole works well for most American compressive hardwoods such as hickory, maple, ash and oak. This hole size may need to be reduced for softer woods or enlarged for harder exotics. Blanks come with a solid stainless ferrule and a leather shock washer. Stainless steel ferrules have an OD of 0.750\", ID of 0.670\", and height of 0.710\". The ferrules have inside bevels for easy insertion and are properly annealed (hardened) to prevent splitting when tangs are driven into the handle. Each ferrule has a lasered Richter logo.\u003c\/p\u003e\r\n        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777745084744,"sku":"B0C2DGPFM7","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-ad03bb11f20d.jpg?v=1786700432"},{"product_id":"narex-822104-small-spoon-carving-hook-knife-right-hand-11-16-inch-wide-tapered-blade-hardened-to-hrc-61-822104","title":"Narex 822104 Small Spoon Carving Hook Knife Right Hand 11\/16 Inch Wide Tapered Blade Hardened to Hrc 61 822104","description":"\u003cdiv class=\"text\"\u003e\n            This professional spoon carving knife is made by Narex Bystrice a highly respected cutting tool manufacturer from the Czech Republic. It is made from the same high-quality Manganese steel as their other edge tools. This spoon-carving or hook knife is perfect when you need to scoop out a convex surface from spoons or bowls. It allows for a more controlled and aggressive cut than a straight knife. It is sharpened on one side and considered a right-hand version that is designed to be pulled towards the carver when using the right hand or pushed away when using the left hand. The blade is made from manganese alloy steel and heat treated for a hardness of 61 HRc, and will take and hold an excellent edge. The blade is 11\/16 inches wide at it’s base and nearly a full 1\/8 inch thick with a flat back. These blade characteristics facilitate smooth and chatter-free cuts. The blade is 2 inches long with a 1 inch radius curved blade. The blade tapers in length and comes to a point allowing access to confined areas. The knife comes razor sharp and ready for use. Handle is a full 1-1\/4 inches wide and 4-1\/2 inches long for a secure grip that reduces fatigue. Handle is made from stained and finished European Beech wood. Overall length is 6-1\/2” This hook knife is an excellent value for a professional quality tool, and will make the perfect addition to any spoon carving set.        \u003c\/div\u003e","brand":"Narex","offers":[{"title":"Default Title","offer_id":53777745215816,"sku":"B079629Q45","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0463\/1880\/files\/horoshop-23c9e866e191.jpg?v=1786700433"}],"url":"https:\/\/sigonnatools.com\/collections\/narex.oembed?page=3","provider":"SIGONNA Tools","version":"1.0","type":"link"}